- Мuseum >>>

- Archival model Floorstander B2V >>>

- Archival model Floorstander B2S >>>

- Archive models Floorstanders V-2 and F-2013 >>>

- Archival model Floorstander B2SE >>>

Floorstanding loudspeaker with Peerless LF drivers and SCAN SPEAK tweeters.

Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, CA, SBA, SA-5, SB-1.

Nameplate capacity: 120 W,
Impedance: 16 Ohms.
Sensitivity: 92 dB\W\m
Frequency response (+\- 2 dB.): 45 - 20000 Hz.
Dimensions: 113,9 (H) x 23,6 (W) x 30,3 (D) cm.
Acoustic design: bass reflex.

Weight of one speaker without packaging: 22.4 kg.


Shipping Weight: 34.7 kg.
Package Dimensions: 125 (H) x 34.6 (W) x 41.3 (D) cm.

Every instance of speakers is tuned in Moscow to get the perfect music transmission.

Due to unstable prices for speakers, their cost is excluded from the price of the F-2020. Speakers are paid separately. The estimated cost of a set of speakers is 78000 rubles.

Excluding the cost of speakers:

Price:

Vinyl finish - 182000 rubles,

Veneer finish - 216000 rubles.

.

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

Grills raise the price of loudspeaker by 6600 roubles.

Attention, the products are made to order with 50% prepayment. The making takes approximately two months.

Ready products are by 20% more expensive. (Except special proposals from the section "Ready products " ).

F-2020 walnut vinyl ebony	F-2020 peach wood veneer
F-2020 walnut tinted veneer	F-2020-mkII rosewood veneer
F-2020-mkII teak veneer	F-2020-mkII stained beech veneer
F-2020-mkII bleached oak	F-2020-mkIII maple vinyl

Rules for connecting amplifiers to F-2020 terminals (the same as for M-2018)

Modern veneer finishing options, please look here.

Not all types of veneer are available. Please, choose several options, indicating priority, if there more than one option that is suitable for you.

On the final speaker type of veneer may differ slightly from the photo link.

Our standard vinyl colours are: black, red, yellow (beech), brown.

All options are with wood imitation

.

The possibility of other finishing options like, for example,white glossy ( - image1 - , - image 2 - , - image3 - ) - please, discuss when  ordering.

Custom vinyl finish raises the price of loudspeaker by 20%