Powerful monitors with Alphard (LF 8 inches) drivers,
Broadband midrange drivers are made in Russia and also used in our Y-1, V-2, D-1, F-2013 and M-2011 models.
Twitters - Alphard with the same type of diffusers, as in ScanSpeak loudspeakers in our D-2, B2SE and MBS-E models.
M-2018 combines compactness with the dynamic capabilities of "large" loudspeakers , such as, for example, B2SE model.
The M-2018 has a very high musical resolution, an excellently balanced low-frequency range and a broad beam pattern.
The price refers to the available models, the sound - to the elite.
Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, SBA, SA-5, SB-1.
Sensitivity 87 dB\W\m
Nameplate capacity - 80 watts.
Frequency response (+\- 2 dB) - 50 - 20000 Hz.
Impedance: 6 Ohm
Dimensions (with grills) - 469 (H) x 233 (W) x 320 (D) mm.
Vinyl finish - 102000 rubles.
Veneer finish - 125300 rubles.
Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering)
Stands are optional.
Vinyl finish - 20000 rubles.
Veneer finish - 31600 rubles.
Necessary height of stands - 63 cm.
|Attention, in connection with instability of the prices of materials and equipment elements , all prices are given approximately. The exact prices will be calculated by preparation of the order for products.
M-2018, black finish with wood imitation
Rules for connecting amplifiers to terminals M-2018
Modern veneer finishing options, please see here.
Not all types of veneer are available.
Please, choose several options, indicating priority, if there more than one option that is suitable for you.
On the final speaker type of veneer may differ slightly from the photo link.
Our standard vinyl finishes are black, red, yellow (beech), brown.
All with wood imitation.
The possibility of other finishing options like, for example,white glossy (image 1 , image 2 ,
image 3 ) - please, discuss when ordering.
Custom vinyl finish raises the price of loudspeaker by 20%
Attention, the products are made to order with 50% prepayment. The making takes approximately two months.
Ready products are by 20% more expensive. (Except special proposals from the section "Ready products " ).