- Museum >>>

Features Peerless drivers and SCAN SPEAK tweeters.

Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, CA, SBA, SA-5, SB-1.

Sensitivity 89 dB\W\m
Nameplate capacity - 60 watts.

Frequency response (+\- 2 dB) - 45 - 20000 Hz.
Impedance: 8 Ohm
Dimensions (with grills) - 440 (H) x 236 (W) x 310 (D) mm.

Every instance of speakers is tuned in Moscow to get the perfect music transmission.

Due to unstable prices for speakers, their cost is excluded from the price of the PM-2019. Speakers are paid separately. The estimated cost of a set of speakers is 59000 rubles.

Excluding the cost of speakers:

Price:

Vinyl finish - 198400 rubles.

Veneer finish - 243900 rubles.

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering)

Grills raise the price of loudspeakers by 9100 rubles.

Stands are optional.

Attention, the sound settings of our monitors are extremely precise. Therefore, metal stands cannot be used - they affect the inductance coils of the acoustic system filters.

Necessary height of stands - 63 cm.

Price:

Vinyl finish - 44000 rubles.

Veneer finish - 69500 rubles.

Only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, CA, SBA, SA-5, SB-1.

Sensitivity 90 dB\W\m
Nameplate capacity - 60 watts.

Frequency response (+\- 2 dB) - 50 - 20000 Hz.
Impedance: 8 Ohm
Dimensions (with grills) - 420 (H) x 236 (W) x 274 (D) mm.

Every instance of speakers is tuned in Moscow to get the perfect music transmission.

Due to unstable prices for speakers, their cost is excluded from the price of the PM-2019-Compact. Speakers are paid separately. The estimated cost of a set of speakers is 59000 rubles.

Excluding the cost of speakers:

Price:

Vinyl finish - 187500 rubles.

Veneer finish - 233000 rubles.

PM-2019, black finish with wood imitation	PM-2019, "beech" vinyl
PM-2019, "nut" vinyl	PM-2019, "mahogany" vinyl

Rules for connecting amplifiers to PM-2019 terminals (the same as for M-2018)

PM-2019-Compact, black finish with wood imitation	PM-2019, white oak veneer

Modern veneer finishing options, please see here.

Not all types of veneer are available.

Please, choose several options, indicating priority, if there more than one option that is suitable for you.

On the final speaker type of veneer may differ slightly from the photo link.

Our standard vinyl finishes are black, red, yellow (beech), brown.
All with wood imitation.

The possibility of other finishing options like, for example,white glossy (image 1 , image 2 , image 3 ) - please, discuss when ordering.

Custom vinyl finish raises the price of loudspeaker by 20%

Attention, the products are made to order with 50% prepayment. The making  takes approximately two months.

Ready products  are by 20% more expensive. (Except special proposals from the section "Ready products " ).

.