- Museum >>>

- Аrchive page >>>

- Аrchive page 2 >>>

V-2

Sensitivity - 91 dB\W\m
Nameplate capacity - 135 W.
Frequency response (+\- 2 dB) - 50 - 20000 Hz.
Impedance: 8 Ohms.
Dimensions: 112 (H) x 24 (W) x 24.5 (D) cm.
Price:
Vinyl finish - 96558 rubles,
Veneer finish - 123893 rubles.

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

F-2013

Are intended only for amplifiers with a damping factor of more than 10. For example, for TA-2, AG-1, SA-5, SB-1.

This model provides a very high audio resolution in the whole range. By the price it refers to our standard models, the resolution and scale of sound are that of elite.

Sensitivity - 88 dB\W\m
Nameplate capacity - 80 W.
Frequency response (+\- 2 dB) - 47 - 16000 Hz.
Impedance: 4 Ohms.
Dimensions: 109,5 (H) x 23,3 (W) x 23,3 (D) cm.
Price:
Vinyl finish - 66297 rubles,
Veneer finish - 87241 rubles.

Toning of veneer adds 10% to 20% to the price, depending on the type of tint. (possibility of toning is discussed when ordering).

Modern veneer finishing options, please look here.

Not all types of veneer are available. Please, choose several options, indicating priority, if there more than one option that is suitable for you.

On the final speaker type of veneer may differ slightly from the photo link.

V-2 mahogany veneer finish

See V-2 in black finish, next to FD-1 in the same finish.

Rules for connecting amplifiers to terminals V-2

F-2013 black finish with wood imitation	Photo by Ruslan Bocharov

Our standard vinyl colours are: black, red, yellow (beech), brown.

The possibility of other finishing options like, for example, white glossy ( - image 1 - , - image 2 - , - images 3 - ) - please, discuss when  ordering and cost.

Attention, the products are made to order with 50% prepayment. The making  takes approximately two months.

Ready products  are by 20% more expensive. (Except special proposals from the section "Ready products " ).